|
| Recent
Articles |
Configuring And Troubleshooting VTP
Not only is your CCNA exam going to have questions on VLAN trunking protocol, almost any network that has more than one VLAN is going to have VTP running.
10 ISIS Details You Must Know!
Earning your CCNP certification and passing the BSCI exam depends on knowing the details of many Cisco...
The Last Windows OS?
Sometimes the game is over even though somebody on the losing team is still running like mad toward home plate. SCO, for example, has released a version 6 of its Unix OS, but they haven't sold many upgrades...
Configuring PortFast And BPDU Guard
In your CCNA studies, you learned about PortFast and the
trouble it can cause if configured on the wrong port!
Suitable only for switch ports connected directly to...
A Guide To IPv6 Address Types
Learning IPv6 is paramount in your efforts to pass the BSCI exam and go on to earn your CCNP, and it´s going to help in your real-world networking career as well.
OSPF Router Types
When you´re preparing to pass the BSCI exam on the way to the coveted Cisco CCNP certification, you can be quickly overwhelmed by the sheer amount of BGP and OSPF knowledge you must demonstrate a mastery of.
Cisco CCNA Exam Tutorial: Route Summarization For RIP, EIGRP, And OSPF
Preparing to pass the CCNA exam and earn this important
Cisco certification? Route summarization is just
one of the many skills youŽll have to master...
Static Routing Tutorial
In studying for your CCNA exam and preparing to earn this
valuable certification, you may be tempted to...
Four Commands For Your CCNA / CCNP Home Lab
More CCNA and CCNP candidates than ever before are putting together their own home practice labs. It´s more affordable than it ever has been, and I receive...
|
|
06.22.06
Frame Relay End-To-End Keepalives
 By
Chris Bryant
One of the first things you learned about Frame is that the LMI also serves as a keepalive, or a heartbeat - and if three consecutive LMIs are missed, the line protocol goes down.
There's a limitation to LMI as a keepalive, though. The LMI is exchanged only between the DTE and the closest DCE. The LMI is therefore a local keepalive that does not reflect any possible issues on the remote end of the virtual circuit.
Taking the LMI concept to the next logical level, Frame Relay End-To-End Keepalives (FREEK, one of the least-heard Cisco acronyms for some reason) are used to verify that endpoint-to-endpoint communications are functioning properly.
What you have to keep in mind about FREEK is that each and every PVC needs two separate keepalive processes. Remember, with a PVC, there's no guarantee that the path taking through the frame relay cloud to get from R1 to R2 is going to be the same path taken to go back from R2 to R1. One process will be used to send requests for information and handle the responses to these requests; this is the send side. When the send side transmits a keepalive request, a response is expected in a certain number of seconds. If one is not received, an error event is noted. If enough error events are recorded, the VC's keepalive status is marked as down.
The process that responds to the other side's requests is the receive side.
This being Cisco, we've got to have some modes, right? FREEK has four operational modes.
Bidirectional mode enables both the send and receive process enabled on the router, meaning that the router will send requests and process responses (send side) and will also respond to remote requests for information (receive side).
Request mode enables only the send process. The router will send requests and process responses to those requests, but will not answer requests from other routers.
Reply mode enables only the receive process. The router will respond to requests from other routers but will initiate no requests of its own.
Finally, passive reply mode allows the router to respond to requests, but no timers are set and no events are tracked.
Frame Relay End-To-End Keepalive defaults:
Two send or receive errors must be registered in order for the VC to be considered down.
The event window size is three. The event window is the number of events considered by the router when determining the status of the VC. Therefore, using the defaults, two send or receive errors would have to be received within the event window of three events for the VC to be considered down.
The timer mentioned earlier - the amount of time a router waits for a response - is set to 10 seconds
Working with Frame Relay end-to-end keepalives is just one Frame skill you'll need to pass the CCNP exams - and I wouldn't be surprised to see them on a CCIE exam. Know the details and you're on your way to Cisco certification exam success!
About the Author:
Chris Bryant, CCIE #12933, is the owner of The Bryant Advantage, home of FREE CCNA and CCNP tutorials and daily exam questions, as well as The Ultimate CCNA and CCNP Study Packages.
|
